/170 schrieb am 2. Juni 2003 11:37
> For general public viewers:
> ASTRA 2 C at 19 degrees East
> Transponder 57, horizontal, MPEG-2, MCPC
> Frequency 10832 MHz, Symbol Rate 22000 MS/sec, FEC+5/6
> Service Name: ESA TV
und wie muss ich das in meine VDR channels.conf eintragen?
hier mal ein kleiner Auszug aus der Doku.
Name (ESA TV), Frequency (10832), Polarisation (h), DiSEqC (0), Srate
(22000) und CA (0) sind klar und kein Problem. Aber was muss
bitteschön als APID, VPID, TPID (wahrscheinlich unwichtig) und PNR
eingetragen werden? Ich habe mir die Daten immer von diversen
SAT-Seiten besorgt.
Hier mal ein Beispiel für "Das Erste":
Das Erste:11837:h:0:27500:101:102:0:0:28106
APID ist 101, VPID ist 102 und PNR ist 28106.
Was auch immer das alles heissen mag... ;-)
-----8<-----------8<-----------8<-----------8<-----------8<------
A channel definition is a line with channel data, where the
fields are separated by ':' charac?
ters. Example:
RTL:12188:h:1:27500:163:104:105:0:12003
The line number of a channel definition (not counting group
separators!) defines the channel's
number in OSD menus and the timers.conf file.
The fields in a channel definition have the following meaning
(from left to right):
Name The channel's name (if the name originally contains a
':' character it has to be
replaced by '|').
Frequency
The transponder frequency in MHz for DVB-S and DVB-C,
kHz for DVB-T (as an integer).
Polarization
The polarization of the satellite signal. 'h' or 'H'
for horizontal, 'v' or 'V' for ver?
tical (DVB-S only).
DiSEqC The DiSEqC code to use for this channel (integer, DVB-S
only).
Srate The symbol rate of this channel (DVB-S and DVB-C only).
VPID The video PID (set to '0' for radio channels, '1' for
encrypted radio channels).
APID The audio PID (either one number, or two, separated by
a comma). If this channel also
carries Dolby Digital sound, the Dolby PIDs follow the
audio PIDs, separated by a semi?
colon, as in ...:101,102;103,104:...
TPID The teletext PID.
Conditional access
An integer defining how this channel can be accessed:
0 Free To Air
1...4 explicitly requires the DVB card with the given
number
>=100 requires a specific decryption method defined
in ca.conf
PNR The program number (aka service ID) of this channel.
-----8<-----------8<-----------8<-----------8<-----------8<------
afaik.
> For general public viewers:
> ASTRA 2 C at 19 degrees East
> Transponder 57, horizontal, MPEG-2, MCPC
> Frequency 10832 MHz, Symbol Rate 22000 MS/sec, FEC+5/6
> Service Name: ESA TV
und wie muss ich das in meine VDR channels.conf eintragen?
hier mal ein kleiner Auszug aus der Doku.
Name (ESA TV), Frequency (10832), Polarisation (h), DiSEqC (0), Srate
(22000) und CA (0) sind klar und kein Problem. Aber was muss
bitteschön als APID, VPID, TPID (wahrscheinlich unwichtig) und PNR
eingetragen werden? Ich habe mir die Daten immer von diversen
SAT-Seiten besorgt.
Hier mal ein Beispiel für "Das Erste":
Das Erste:11837:h:0:27500:101:102:0:0:28106
APID ist 101, VPID ist 102 und PNR ist 28106.
Was auch immer das alles heissen mag... ;-)
-----8<-----------8<-----------8<-----------8<-----------8<------
A channel definition is a line with channel data, where the
fields are separated by ':' charac?
ters. Example:
RTL:12188:h:1:27500:163:104:105:0:12003
The line number of a channel definition (not counting group
separators!) defines the channel's
number in OSD menus and the timers.conf file.
The fields in a channel definition have the following meaning
(from left to right):
Name The channel's name (if the name originally contains a
':' character it has to be
replaced by '|').
Frequency
The transponder frequency in MHz for DVB-S and DVB-C,
kHz for DVB-T (as an integer).
Polarization
The polarization of the satellite signal. 'h' or 'H'
for horizontal, 'v' or 'V' for ver?
tical (DVB-S only).
DiSEqC The DiSEqC code to use for this channel (integer, DVB-S
only).
Srate The symbol rate of this channel (DVB-S and DVB-C only).
VPID The video PID (set to '0' for radio channels, '1' for
encrypted radio channels).
APID The audio PID (either one number, or two, separated by
a comma). If this channel also
carries Dolby Digital sound, the Dolby PIDs follow the
audio PIDs, separated by a semi?
colon, as in ...:101,102;103,104:...
TPID The teletext PID.
Conditional access
An integer defining how this channel can be accessed:
0 Free To Air
1...4 explicitly requires the DVB card with the given
number
>=100 requires a specific decryption method defined
in ca.conf
PNR The program number (aka service ID) of this channel.
-----8<-----------8<-----------8<-----------8<-----------8<------
afaik.